Slidekamera HGO-3 rotational fluid head

  • Code: HGO-3
  • szt.
  • €200.00
Slidekamera HGO-3 rotational fluid head is used for smooth regulation of the rotation as well as smooth change of the rotation resistance of HKR-1, HKR-4, HKR-6 camera cranes, Slidekamera devices S and HSK series and other accessories. Our head is equipped with a knob that regulates the rotation of the mounting plate. Double bearing provides high load capacity, rigidity and precision of rotation. In addition, grease inside the head increases resistance during rotation and eliminates internal clearances.

HGO-3 head mounting plate is equipped with a number of holes that allow to mount various accessories in a variety of combinations, thus providing great configuration possibilities and universality of our product.

Table showing configuration possibilities of Slidekamera HGO-3 rotational fluid head:

HEAD MOUNTING PLATE Mounting hole Dedicated device Screws
Four M4 holes
3/8" central hole
Slidekamera HKR-1 Camera crane AF-12 LG reduction 3/8" mandrel
Four M4x12 screws
Four M4 holes
3/8" central hole
Slidekamera HKR-4, HKR-6 Camera crane Four M4x12 screws
3/8" x 1" screw with a spacer
Four M4 holes
(Manfrotto spacing)
Slidekamera AKC-3 Adapter
Manfrotto adapter
Four M4x12 screws
3/8" central hole Slidekamera device S or HSK series through Slidekamera AF-8 lower port AF-12 LG reduction 3/8" mandrel
HEAD BASE Three M5 holes Slidekamera HST-2 Tripod Three M5x25 screws
Three M5 holes Slidekamera AF-16 Adapter Three M5x30 screws
3/8" central hole Slidekamera HCZ Socket* Slidekamera HSZ-2
quick mounting screw
Three M5 holes Slidekamera AF-18 Leveling adapter Three M5x12 screws
* Slidekamera HCZ socket is attached to HST-2 tripod with three M6 screws.

Specification:

Application: for smooth regulation of the rotation of Slidekamera devices
Material: aluminium
Bubble level: 1
Panoramic rotation: 360°
Front tilt: n/a
Height: 70mm
Safety Payload: 80kg
Weight: 2kg
Tripod mounting: 3/8" threaded screw
Mounting accessories: 3/8" threaded screw
Color: black

Set includes:

  • Slidekamera HGO-3 rotational fluid head
  • Three M5 x 25 screws
  • Four M4 x 12 screws
  • 4mm Allen key L type
  • 5mm Allen key L type
  • AF-12 LG reduction 3/8" mandrel
  • User Manual

NOTE: Slidekamera HGO-3 rotational fluid head is NOT A VIDEO HEAD and it is not suitable for working with your camera or photo camera.

NOTE: Please note that when Slidekamera HKR-1 crane is mounted on HGO-3 rotational fluid head the resistance will be greater due to the fact that HKR-1 crane is lighter than HKR-4 or HKR-6 camera cranes. Consequently, the crane will not move as smooth as it is in case of HKR-4 and HKR-6 cranes that are heavier. For smaller head rotation resistance we recommend using Slidekamera HGO-2 rotational head with HKR-1 camera crane.